GNEE ka bay fòm nan
Pwodwi Deskripsyon
Kwiv aliminyòm se youn nan materyèl ki pi lajman itilize nan plizyè aplikasyon endistriyèl. Li gen yon fòs sede nan 186 MPa (27 ksi), yon fòs rupture nan 414 MPa (60 ksi), ak yon elongasyon nan 55%. Tib kwiv aliminyòm yo trè rezistan a efè dlo sale ak gwo -sèl vitès. Tib kwiv aliminyòm sa a disponib nan fòm baton. Youn nan karakteristik ki pi enpòtan nan materyèl sa a se rezistans enpak ekstrèmman wo li yo. Tib kondansateur an kwiv aliminyòm yo te itilize nan kondansateur ak echanjeur chalè. Tib kwiv aliminyòm c68700 gen yon konpozisyon chimik trè tipik: Al: 1.8-2.5%, Pb: jiska 0.05%, Cu: 76-79%, Fe: 0.05%, Kòm: 0.02-0.06%, ak Zn: apeprè 10%. Kwiv aliminyòm se yon alyaj kwiv ak zenk, ak yon ti kantite asenik te ajoute pou anpeche dezincification.
Kowozyon -ki anpeche aliminyòm kwiv lajman itilize nan tib kondansateur. Tib kwiv aliminyòm sa yo fòme yon fim pwoteksyon alantou yo ki gen pwopriyete gerizon pwòp tèt ou -. Sa a kalite tib kwiv aliminyòm ka itilize nan evaporateur, plant desalination, reparasyon ak konstriksyon bato, kondansateur, echanjeur chalè ak radyatè, distilateur, raffineries, aman, forè lwil oliv lanmè, plant elektrik, ak plis ankò. Li ideyal pou aplikasyon pou kote kwiv naval pa ofri pwoteksyon enpak ak pou gwo vitès dlo refwadisman, tankou nan plant elektrik sou rivaj ak lanmè.
Tib kwiv aliminyòm C68700 ki reziste -reziste kont gwo -sèl vitès ak korozyon dlo nwa epi li souvan itilize nan tib kondansateur. Karakteristik prensipal li yo se rezistans segondè li yo nan korozyon enpak. Tib kwiv aliminyòm ASTM B111 C68700 rekòmande pou plant elektrik lanmè ak onshore ak gwo vitès dlo refwadisman. Kòm yon founisè tib aliminyòm kwiv etabli, nou sous tib kondansateur kwiv aliminyòm soti nan moulen rekonèt mondyal epi yo ofri yon pakèt fòm, gwosè, ak klas nan stock.
Tib kwiv aliminyòm - C68700
| UNS No. | C68700 - Nimewo BSI CZ110 - Non ISO CuZn22AI2 |
| Chimik Comp. (%) | Cu 76 ~ 79 / Al 1.8 ~ 2.5 / Pb 0.07 / Fe 0.06 max / Zn rem / Kòm 0.02 ~ 0.06 |
| Espesifikasyon ASTM. | ASTM B111, B395 |
| Espesifikasyon ASME. | SB 111, SB 395 |
| Aplikasyon | Tib kondansateur, evaporateur ak echanjeur chalè; Tib Distilatè. |
| Tanperaman | O61 rkwit |
| Pwopriyete * | Metrik | angle |
|---|---|---|
| Dansite | 8.33 g/cc | 0.301 lb/pous³ |
| Fòs rupture, min. | 345 MPa | 50 ksi |
| Fòs Sede, min. | 125 MPa | 18 ksi |
| CTE, lineyè | 18.5 10-6/ degre @ 20.0 - 300 degre | 10.3 10-6/ degre F @ 70.0 - 570 degre F |
| Kapasite Chalè Espesifik | 0.09 cal/g- degre @ 20ºC | 0.09 BTU/lb- degre F @ 70ºF |
| Kondiktivite tèmik | 100.4 W/m-K @ 20.0 degre | 58 BTU/ft2/ft/h/ degre F @ 70.0 degre F |
| Pwen k ap fonn | 932 ~ 971 degre | 1710 ~ 1780 degre F |
| Atik | Tiyo an kwiv aliminyòm, tib an kwiv aliminyòm |
|---|---|
| Materyèl |
Kwiv:C21000, C22000, C22600, C23000, C24000, C26000, C26130, C26800, C27000, C27200, C27400, C2800, H59, H62, H70, H62, H70, H65, H65 CuZn37, CuZn35, CuZn40, elatriye Kwiv plon:C31400, C31600, C32000, C33000, C33200, C33500, C34000, C34200, C34500, C35000, C35300, C35600, C36000, C36000, C36500, C36500, C36500, C36570 C38000, C38500, elatriye Fèblan kwiv:C40500, C40800, C41100, C42200, C44400, C48200, C46400, C46200, elatriye |
| Spesifikasyon | OD: 2mm ~ 914mm, WT: 0.2mm ~ 120mm |
| Dyamèt Eksteryè | 2mm ~ 914mm |
| Epesè | 0.2mm ~ 120mm |
| Longè | 1m, 2m, 3m, 4m, 6m, oswa jan sa nesesè, 1m, 2m, 3m, oswa jan sa nesesè |
| Alyaj oswa pa | Èske alyaj |
| Gwosè tib an kwiv aliminyòm | 3.35 mm OD Pou 101.6 mm OD, 15 NB pou 150 NB IN |
| Epesè miray la | 0.2mm ~ 120mm |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Longè tib an kwiv aliminyòm | Single Random, Double Random, Standard & Koupe longè |
| Fini aliminyòm tib an kwiv | Poli, AP (Annealed & marinated), BA (Klere & Annealed), MF |
| Fòm tib an kwiv aliminyòm | Wonn, bobin, kare, rektangilè, chodyè, idwolik, dwat oswa 'U' Bent Tib, Hollow, LSAW Tib elatriye. |
| Kalite tib an kwiv aliminyòm | San pwoblèm, ERW, EFW, soude, fabrike |
| Fen | Plain Fen, Bizote Fen, Treaded |
| Marking | Tout tib an kwiv aliminyòm yo make jan sa a: estanda, klas, OD, epesè, longè, nimewo chalè (oswa selon demann kliyan an.) |
| Aplikasyon | Tib lwil oliv, Tib gaz, Tib likid, chodyè ak echanjeur chalè |
| Sèvis Valè Te ajoute | Trase & ekspansyon jan pou chak egzije gwosè & longè, Polonè (elektwo & Komèsyal) rkwit & marinated koube, machinn elatriye. |
| Sifas | moulen, poli, klere, liy cheve, glas, bwòs, eksplozyon sab, elatriye |
| Espesyalize nan | Tib kapilè aliminyòm kwiv ak lòt gwosè enpè Aliminyòm kwiv chalè echanjeur & kondansateur tib |
| Ekspòte nan |
Iland, Singapore, Endonezi, Ikrèn, Arabi Saoudit, Espay, Kanada, USA, Brezil, Thailand, Kore di, Iran, Larisi, Chili, peyi Zend, peyi Lejip, Omàn, Kowet, peyi Lejip, Vyetnam, Angletè, Holland, Meksik, Perou, Malezi, Itali, Nijerya, elatriye. |
| Kapasite Pwovizyon pou | 3000 tòn metrik / tòn metrik pou chak mwa gwosè estanda nan stock |
|
Gwosè veso |
20ft GP: 5898mm (Longè) x 2352mm (Lajè) x 2393mm (Segondè) |
| Sètifika tès | Sètifika tès manifakti Sètifika tès laboratwa ki soti nan Govt. Apwouve Laboratwa. Anba Twazyèm Pati Enspeksyon |
Tib wonn kwiv aliminyòm
| OD metrik | Epesè miray la | Imperial OD | Epesè miray la | Nominal twou mm | WT / mèt |
|---|---|---|---|---|---|
| 4.76MM | 0.71MM | 3/16″OD | 22G | 3.34 | 0.077 |
| 6.35MM | 1.63MM | 1/4″OD | 16G | 3.09 | 0.206 |
| 6.35MM | 1.22MM | 1/4″OD | 18G | 3.91 | 0.167 |
| 6.35MM | 0.91MM | 1/4″OD | 20G | 4.53 | 0.133 |
| 7.94MM | 0.91MM | 5/16″OD | 20G | 6.11 | 0.172 |
| 9.52MM | 1.63MM | 3/8″OD | 16G | 6.26 | 0.345 |
| 9.52MM | 1.22MM | 3/8″OD | 18G | 7.08 | 0.271 |
| 9.52MM | 0.91MM | 3/8″OD | 20G | 7.70 | 0.210 |
| 12.7MM | 1.63MM | 1/2″OD | 16G | 9.44 | 0.484 |
| 12.7MM | 1.22MM | 1/2″OD | 18G | 10.26 | 0.375 |
| 12.7MM | 0.91MM | 1/2″OD | 20G | 10.88 | 0.288 |
| 14.29MM | 0.91MM | 9/16″OD | 20G | 12.47 | 0.550 |
| 15.88MM | 1.63MM | 5/8″OD | 16G | 12.62 | 0.622 |
| 15.88MM | 1.22MM | 5/8″OD | 18G | 13.44 | 0.479 |
| 15.88MM | 0.91MM | 5/8″OD | 20G | 14.06 | 0.365 |
| 19.05MM | 3.25MM | 3/4″OD | 10G | 12.55 | 1.376 |
| 19.05MM | 1.63MM | 3/4″OD | 16G | 15.79 | 0.761 |
| 19.05MM | 1.22MM | 3/4″OD | 18G | 16.61 | 0.583 |
| 19.05MM | 0.91MM | 3/4″OD | 20G | 17.23 | 0.442 |
| 22.22MM | 1.63MM | 7/8″OD | 16G | 18.96 | 0.899 |
| 22.22MM | 1.22MM | 7/8″OD | 18G | 19.78 | 0.687 |
| 25.4MM | 1.63MM | 1″OD | 16G | 22.14 | 1.038 |
| 25.4MM | 1.22MM | 1″OD | 18G | 22.96 | 0.791 |
| 25.4MM | 0.91MM | 1″OD | 20G | 23.00 | 0.597 |
| 28.58MM | 1.63MM | 1-1/8″OD | 16G | 25.32 | 1.177 |
| 31.75MM | 1.63MM | 1-1/4″OD | 16G | 28.49 | 1.316 |
| 31.75MM | 1.22MM | 1-1/4″OD | 18G | 29.31 | 0.998 |
| 34.92MM | 1.63MM | 1-3/8″OD | 16G | 31.66 | 1.454 |
| 38.1MM | 3.25MM | 1-1/2″OD | 10G | 31.60 | 3.040 |
| 38.1MM | 1.63MM | 1-1/2″OD | 16G | 34.84 | 1.593 |
| 38.1MM | 1.22MM | 1-1/2″OD | 18G | 35.66 | 1.206 |
| 44.45MM | 3.25MM | 1-3/4″OD | 10G | 37.95 | 3.600 |
| 44.45MM | 1.22MM | 1-3/4″OD | 18G | 42.01 | 1.410 |
| 50.8MM | 3.25MM | 2″OD | 10G | 44.30 | 4.140 |
| 50.8MM | 1.63MM | 2″OD | 16G | 47.54 | 2.418 |
| 50.8MM | 1.22MM | 2″OD | 18G | 48.36 | 1.621 |
| 57.2MM | 3.25MM | 2-1/4″OD | 10G | 50.70 | 4.700 |
| 63.5MM | 3.25MM | 2-1/2″OD | 10G | 57.00 | 5.248 |
| 63.5MM | 1.63MM | 2-1/2″OD | 16G | 60.24 | 2.703 |
| 69.85MM | 3.25MM | 2-3/4″OD | 10G | 63.35 | 5.810 |
| 76.2MM | 3.25MM | 3″OD | 10G | 69.70 | 6.354 |
| 82.55MM | 3.25MM | 3-1/4″OD | 10G | 76.05 | 6.910 |
| 88.90MM | 3.25MM | 3-1/2″OD | 10G | 82.40 | 7.460 |
| 95.25MM | 3.25MM | 3-3/4″OD | 10G | 88.75 | 8.020 |
| 107.95MM | 3.25MM | 4-1/4″OD | 10G | 101.45 | 9.670 |
| 133.5MM | 3.25MM | 5″ ID | 10G | 127.00 | 11.800 |
| 158.9MM | 3.25MM | 6″ ID | 10G | 152.40 | 13.900 |
Tib kare aliminyòm kwiv
| SIZE | PWA | |
|---|---|---|
| nan | mm | kg/m |
| 1/2 x 18G | 12.7 x 1.22 | 0.48 |
| 3/4 x 18G | 19.05 x 1.22 | 0.75 |
| 1 x 18G | 25.4 x 1.22 | 0.99 |
| 30.0 x 1.22 | 1.20 | |
| 1-1/2 x 18G | 38.10 x 1.22 | 1.54 |
Pwodwi ki bay pa GNEE
| Kategori pwodwi | Creole & Materyèl | Fòm ki disponib | Epesè / Dyamèt Range | Lajè / OD Range | Longè / Fòm | Tanperaman / Eta | Sifas fini |
|---|---|---|---|---|---|---|---|
| Fèy Copper & Plak | ASTM B152, B187 Pi Copper (C11000) Fosfò Bwonz, An kwiv |
• Bobin • Fèy • Plak |
Fèy:0.3 mm - 10.0 mm Plak:10.0 mm - 100 mm |
100 mm - 2500 mm | Bobin: Custom Fèy / Plak: 1000mm - 6000mm oswa Custom |
• O (mou rkwit) • H02 (Mwatye-Difisil) • H04 (difisil) • H08 (Fil-difisil) |
• Moulen (Vi) • Rad • Bwose • Kouvwi |
| Copper Rod & Bar | ASTM B133, B187 Pi Copper, Telurium Copper Kwiv, Bwonz |
• Round Rod • Bar kare • Egzagonal Bar • Flat Bar |
Rod Dia.:2.0 mm - 300 mm Flat Bar Thk.:3 mm - 50 mm |
Lajè ba plat:10 mm - 400 mm | Dwat: 1000mm - 6000mm Bobin (pou ti dia.) |
• Rekwit (mou) • Mwatye-Difisil • Difisil • Kòm trase |
• Trase (lis) • Vire (Kale) • Tè (poli) |
| Fil kwiv | ASTM B1, B3 Bare Copper, Tinned Copper |
• Bare Fil • Fil fèblan • Fil bloke • Fil trese |
Fil solid:0.05 mm - 10.0 mm Bloke:Custom (egzanp, 7/0.2mm) |
- | Bobin, bobin, bobin Pwa: Custom (egzanp, 5kg, 25kg) |
• Mou (Annealed) • Hard Desine • Mwayen-Difisil |
• Bright Bare • Electrotinned • Okside-Rezistan |
| Tib kwiv ak tiyo | ASTM B75, B88 San pwoblèm, soude DHP Copper (C12200) |
• Tib Dwat • Tib mawonnen • Tib Kapilè • Tib kare |
OD:3 mm - 300 mm Mi Thk.:0.5 mm - 10.0 mm |
- | Dwat: 1000mm - 8000mm Bobin: Longè Custom |
• Rekwit (mou, pliye) • Trase difisil (dwat) |
• Bare (Pwòp) • Poli • Plastik bouchon |
| Foil kwiv | ASTM B370 Woule rkwit (RA) Electrodeposited (ED) |
• Woule / Bobin • Dezabiye |
Epesè:0.01 mm - 0.50 mm (10 µm - 500 µm) |
10 mm - 1300 mm | Bobin: Longè Custom | • Kòm woule (difisil) • Rekwit (mou, duktil) • Plastifye |
• Estanda (yon sèl bò klere) • Double Side Bright • Trete (pou PCB) |
