C12200 Feuille CopperSpesifikasyon
| Pwopriyete | Detay yo |
|---|---|
| C12200 bann Size | 10 a 300mm |
| UNS C12200 Estanda Foil | ASTM B 68, ASTM B 75, BS EN 13601:2002 |
| C12200 Copper Flat Klas | GB, DIN, EN |
| ASTM B280 C12200 Taye bann Longè | 10 a 250mm |
| Alloy C12200 bann mens tanperaman | Mwatye difisil, rkwit, plen difisil |
| Kalite bann C12200 | Mwatye reyon, kare, reyon konplè |
| UNS C12200 Foil Epesè | 1 a 50 mm |
| C12200 Copper Flat Itilizasyon | Do-kay, Chillers, defans |
| Tib rkwit SB 75 C12200 Metòd Faktori | Anòd, Post Tretman, Electrodeposition |
Mande echantiyon gratis kounye a
C12200 Strips Range epesè
| Epesè nominal (mm) | Epesè nominal (pous) |
|---|---|
| 0.0254 | 0.001" |
| 0.0508 | 0.002" |
| 0.0762 | 0.003" |
| 0.1016 | 0.004" |
| 0.1270 | 0.005" |
| 0.1524 | 0.006" |
| 0.1778 | 0.007" |
| 0.2032 | 0.008" |
| 0.2286 | 0.009" |
| 0.2540 | 0.010" |
| 0.3048 | 0.012" |
| 0.3810 | 0.015" |
| 0.5080 | 0.020" |
| 0.6350 | 0.025" |
| 0.7620 | 0.030" |
| 0.8890 | 0.035" |
| 1.0160 | 0.040" |
| 1.2700 | 0.050" |
| 1.5240 | 0.060" |
| 2.0320 | 0.080" |
Ekspòtatè SB 75 C12200 Trim Strips nan divès gwosè pou endistri elektrik
UNS C12200 Tablo gwosè papye
| Klas | Pou Dra | Pou bann ak FOIL | |||||
|---|---|---|---|---|---|---|---|
| Lajè ranje (Min-Max) (mm) | Longè (Max) (mm) | Epesè ranje (Min{0}}Max) (mm) | Dansite bobin (Pwa) (Max) | Bobin ID (Min-Max) (mm) | Epesè ranje (Min{0}}Max) (mm) | Lajè ranje (Min-Max) (mm) | |
| C12200 Feuille Copper | 450 Max | 4000 | 1 - 3.00 | 2 - 3 | 300 - 500 | 0.81 - 3.00 | 20 - 400 |
| 100 - 300 | 0.030 - 0.3 | 10 - 350 | |||||
| 450 Max | 1500 | 0.30 - 1 | 100 - 300 | 0.031 - 0.80 | 10 - 450 |
C12200 Kalite Foil Copper
C12200 bann
UNS C12200 Feuille
C12200 Copper Flat
ASTM B280 C12200 Trim Strips
Alloy C12200 bann mens
C12200 bann mens konpozisyon chimik
| Eleman | Kontni (%) |
|---|---|
| Kwiv | 99.9 |
| Fosfò | 0.015 - 0.040 |
ASTM B280 C12200 Trim Strips Pwopriyete mekanik
| Estanda | alyaj kwiv No. | Tanperaman | Gwosè grenn (mm) | Fòs rupture (MPa) | elongasyon (%) |
|---|---|---|---|---|---|
| EN 1057 | - | R290 | - | 290 | 3 |
| R220 | - | 220 | 40 | ||
| R250 | - | 250 | 30 / 20 | ||
| ASTM B88 | C12200 | H58 | - | 250 | - |
| C11000 | O60 | 0.040 | 200 | - | |
| O50 | 0.025 | 200 | - | ||
| JIS H3300 | C1220 | O | 0.025-0.060 | 205 | 40 |
| OL | 0.040 | 205 | 40 | ||
| H | - | 255 | - | ||
| 1/2H | - | 245-325 | - | ||
| C1100 | H | - | 265 | - | |
| O | - | 205 | 40 | ||
| OL | - | 245-325 | - | ||
| ASTM B75 | C12200 | H58 | - | 250 | - |
| H80 | - | 310 | - | ||
| C11000 | O60 | 0.040 | 205 | - | |
| O50 | 0.040 | 205 | - |
Alloy C12200 bann mens Pwopriyete tèmik
| Tretman | Tanperati maksimòm (degre F) | Tanperati min (degre F) |
|---|---|---|
| Cho Tanperati Travay | – | 1400 |
| Recuit | 1200 | 750 |
C12200 Strips Espesifikasyon aplikab
| Fòm | Estanda | Sistèm | Deskripsyon | Aplikasyon |
|---|---|---|---|---|
| - | B577 | ASTM | Deteksyon nan oksid cuprous (sensibilite idwojèn embrittlement) nan kwiv | |
| - | B224 | ASTM | Klasifikasyon Creole nan Coppers | |
| Bann | MIL-B-18907 | MILITÈ | BAND, PWOKTIL WOTE | Pwojektil wotasyon |
| Bann | MIL-B-20292 | MILITÈ | BLAN, BANK WOTE, POU PWOJKTIL | Pwojektil wotasyon |
| Bar | B187/B187M | ASTM | Copper Bus Bar, Rod ak fòm | |
| Bar | B152/B152M | ASTM | Fèy kwiv, retire rad sou ou, plak ak woule Bar | |
| Bar | J463 | SAE | Kwiv fòje ak alyaj kwiv | |
| Bar | J461 | SAE | Fòje ak jete alyaj kwiv | |
| Tib kondansateur ak echanjeur chalè ak najwar entegral | B956/B956M | ASTM | Soude kwiv ak kwiv -Alyaj kondansateur ak tib echanjeur chalè ak najwar entegral | |
| Bar otobis, baton ak fòm | SB187 | ASME | Copper Bus Bar, Rod ak fòm | |
| Brazing Filler Metal | QQ-B-650 | FEDERAL | Braz alyaj, kwiv, kòb kwiv mete-zenk, ak kwiv-fosfò | |
| Fitting | B16.29 | ASME | Kwiv fòje ak alyaj kòb kwiv mete soude-Fittings drenaj jwenti | |
| Fitting | B16.22 | ASME | Kwiv fòje ak alyaj kòb kwiv mete soude-Fittings presyon Joint | |
| Tib echanjeur chalè | B903 | ASTM | Tib echanjeur chalè kwiv ak amelyorasyon entèn | |
| Tib echanjeur chalè | B919 | ASTM | Tib echanjeur chalè kwiv soude ak amelyorasyon entèn | |
| Pwent tete | B687 | ASTM | Kwiv, kwiv ak Kwòm plake pwent tete tiyo | |
| Tiyo | B42 | ASTM | Tiyo kwiv san pwoblèm, gwosè estanda | |
| Tiyo | B302 | ASTM | Threadless Copper Tiyo | |
| Tiyo | B698 | ASTM | Kwiv, kwiv alyaj tiyo plonbri ak tib | |
| Tiyo, san pwoblèm, gwosè estanda | SB42 | ASME | Tiyo kwiv san pwoblèm, gwosè estanda | |
| Plak | B152/B152M | ASTM | Fèy kwiv, retire rad sou ou, plak ak woule Bar | |
| Plak | B432 | ASTM | Kwiv ak kwiv alyaj revèti plak asye | |
| Fòm rafineri | B5 | ASTM | Segondè konduktivite difisil -Fòm rafineri kòb kwiv mete anplasman | |
| Fòm rafineri | B379 | ASTM | Fosforize Coppers - Fòm rafineri | |
| Rod | J463 | SAE | Kwiv fòje ak alyaj kwiv | |
| Rod | J461 | SAE | Fòje ak jete alyaj kwiv | |
| Tib san pwoblèm | SB75 | ASME | Tib kwiv san pwoblèm | |
| Echanjeur chalè san pwoblèm ak tib kondansateur | SB359 | ASME | Copper & Copper Alloy san pwoblèm kondansasyon & Tib echanjeur chalè ak Fins entegral | |
| Tib kondansateur san pwoblèm & Stock Ferrule | SB111 | ASME | Kwiv ak kwiv alyaj san pwoblèm kondansasyon tib & Ferrule Stock | Tib kondansasyon |
| Fòm | B187/B187M | ASTM | Copper Bus Bar, Rod ak fòm | |
| Fòm | J461 | SAE | Fòje ak jete alyaj kwiv | |
| Fòm | J463 | SAE | Kwiv fòje ak alyaj kwiv | |
| Fèy | B101 | ASTM | Plon-Fòl kwiv kouvwi | |
| Fèy | B506 | ASTM | Fèy Nerjaveèi an kwiv kouvri ak retire rad sou ou pou konstriksyon bati | |
| Fèy | J463 | SAE | Kwiv fòje ak alyaj kwiv | |
| Fèy | J461 | SAE | Fòje ak jete alyaj kwiv | |
| Fèy | B152/B152M | ASTM | Fèy kwiv, retire rad sou ou, plak ak woule Bar | |
| Fèy | B370 | ASTM | Fèy kwiv ak bann pou konstriksyon bilding | Konstriksyon bilding |
| Fil | B272 | ASTM | Pwodwi plat kwiv ak kwen fini (woule oswa trase) (fil plat ak teren) | |
| Fèy, retire rad sou ou, bar roulo ak plak | SB152 | ASME | Fèy kwiv, teren, plak, ak woule Bar | |
| Dezabiye | SB152 | ASME | Fèy kwiv, teren, plak, ak woule Bar | |
| Dezabiye | B506 | ASTM | Fèy Nerjaveèi an kwiv kouvri ak retire rad sou ou pou konstriksyon bati | |
| Dezabiye | J463 | SAE | Kwiv fòje ak alyaj kwiv | |
| Dezabiye | B272 | ASTM | Pwodwi plat kwiv ak kwen fini (woule oswa trase) (fil plat ak teren) | |
| Dezabiye | B152/B152M | ASTM | Fèy kwiv, retire rad sou ou, plak ak woule Bar | |
| Dezabiye | B370 | ASTM | Fèy kwiv ak bann pou konstriksyon bilding | Konstriksyon bilding |
| Dezabiye | J461 | SAE | Fòje ak jete alyaj kwiv | |
| Tib | B280 | ASTM | Tib kwiv san pwoblèm pou èkondisyone ak sèvis refwadisman jaden | ACR Field Service |
| Tib | B640 | ASTM | Soude kòb kwiv mete ak tib alyaj kwiv pou èkondisyone ak sèvis refrijerasyon | Sèvis ACR |
| Tib | B75/B75M | ASTM | Tib kwiv san pwoblèm | |
| Tib | MIL-T-3235 | MILITÈ | Tib, kwiv, san pwoblèm (pou itilize tòpiyè) | |
| Tib | SB543 | ASME | Soude kòb kwiv mete ak tib alyaj kwiv | |
| Tib | B698 | ASTM | Kwiv, kwiv alyaj tiyo plonbri ak tib | |
| Tib | SB395 | ASME | U-Bend Seamless Copper & Copper Alloy echanjeur chalè ak tib kondansateur | |
| Tib | B306 | ASTM | Tib drenaj kwiv (DWV) | Drenaj (DWV) |
| Tib | B447 | ASTM | Tib kwiv soude | |
| Tib | J461 | SAE | Fòje ak jete alyaj kwiv | |
| Tib | MIL-T-24107 | MILITÈ | Tib, kwiv, san pwoblèm | |
| Tib | B743 | ASTM | Tib kwiv san pwoblèm nan bobin | |
| Tib | B543/B543M | ASTM | Soude kòb kwiv mete ak kwiv alyaj chalè echanjeur tib | |
| Tib | B359/B359M | ASTM | Kwiv ak kwiv-Alyaj san pwoblèm kondansasyon ak tib echanjeur chalè ak najwar entegral | |
| Tib | B360 | ASTM | Difisil-Tib Capillary Copper Desine pou aplikasyon pou restriksyon | Kapilè |
| Tib | J461 | SAE | Fòje ak jete alyaj kwiv | |
| Tib | B716 | ASTM | Soude Tib Dlo Copper | |
| Tib | J463 | SAE | Kwiv fòje ak alyaj kwiv | |
| Tib | MIL-T-22214 | MILITÈ | Tib, kondansasyon ak echanjeur chalè ak najwar entegral | |
| Tib | B68/B68M | ASTM | Tib kwiv san pwoblèm, klere rkwit | Bright rkwit |
| Tib | J463 | SAE | Kwiv fòje ak alyaj kwiv | |
| Tib | B641 | ASTM | Tib distribisyon kwiv san pwoblèm ak soude (Tip D) | |
| Tib | B395/B395M | ASTM | U-Bend san pwoblèm kwiv ak alyaj kòb kwiv mete echanjeur chalè ak tib kondansateur | |
| Tib | B641 | ASTM | Tib distribisyon kwiv san pwoblèm ak soude (Tip D) | |
| Tib | B111/B111M | ASTM | Tib kondansateur san pwoblèm kwiv ak alyaj kwiv ak Stock Ferrule | Tib kondansasyon |
| Tib, Nerjaveèi pou gaz medikal | B819 | ASTM | Tib kwiv san pwoblèm pou sistèm gaz medikal | |
| Tib, kondansasyon & echanjeur chalè, san pwoblèm ak najwar | SB956 | ASME | Tib, soude, kondansasyon, echanjeur chalè, ak najwar entegral | |
| Tib pou transmisyon gaz | B837 | ASTM | Tib kwiv san pwoblèm pou sistèm distribisyon gaz gaz natirèl ak petwòl likid (LP). | |
| Tib, Dlo | B88M | ASTM | Tib dlo kwiv san pwoblèm (metrik) | |
| Tib, Dlo | B88 | ASTM | Seamless Copper Dlo Tib | Dlo |
UNS C12200 Pwosesis Fabrication Foil
| Coining | Desen | Koube & Fòme | Peze & cho Forge |
| Knurling & Roll Threading | K ap vire | Stamping | Blanking |
| Coppersmithing | Gravure | boulvèsan & tit | Pwensonaj & Piercing |
| Taye taye | Swaging & peze |
C12200 Copper Flat Strip Lis Pri
| Gwosè | Pri nan USD |
|---|---|
| 11.10 mm × 1.75 mm | $ 10.61 |
| 6.55 mm × 2.5 mm | $ 11.21 |
| 10.90 mm × 1.65 mm | $ 10.70 |
| 25 mm × 6 mm | $ 11.79 |
| 9.75 mm × 2.80 mm | $ 13.21 |
| 40 mm × 5 mm | $ 12.52 |
| 5.80 mm × 1.50 mm | $ 11.27 |
ASTM B280 C12200 Trim Strips Pwopriyete Fizik
| Pwopriyete | Valè |
|---|---|
| Pwen k ap fonn - likid | 1981 degre F |
| Modil Rigidite | 6400 Ksi |
| Espesifik gravite | 8.94 |
| Kondiktivite tèmik nan 68 degre F | 196 Btu / pye kare / pye / èdtan |
| Koyefisyan ekspansyon tèmik (68-392 degre F, 10⁻⁶ / degre F) | 9.5 |
| Kapasite Chalè Espesifik nan 68 degre F | 0.092 Btu/lb/ degre F |
| Dansite nan 68 degre F | 0.323 lb/pous³ |
| Kondiktif elektrik IACS nan 68 degre F | 85% |
| Koyefisyan ekspansyon tèmik (68-212 degre F, 10⁻⁶ / degre F) | 9.4 |
| Koyefisyan ekspansyon tèmik (68-572 degre F, 10⁻⁶ / degre F) | 9.8 |
| Modil Elastisite nan tansyon | 17,000 ksi |
Alloy C12200 bann mens Pwopriyete fabrikasyon
| Teknik | Konvnab |
|---|---|
| Soude | Ekselan |
| Braz | Ekselan |
| Gaz pwoteje Arc soude | Ekselan |
| Oxyacetylene Welding | Bon |
| Bou soude | Bon |
| Kouvwi metal Arc soude | Pa Rekòmande |
| Tach Weld | Pa Rekòmande |
| Couture Weld | Pa Rekòmande |
| Kapasite pou yo te travay frèt | Ekselan |
| Kapasite pou yo te fòme cho | Ekselan |
| Forgeability Rating | 65 |
| Evalyasyon machinabilite | 20 |
UNS C12200 Foil Pwopriyete elektrik
| Deziyasyon yo | Konduktivite | Rezistans volim (Ω × mm²/m max.) | Rezistivite mas (Ω × g/m² max.) | |||
|---|---|---|---|---|---|---|
| Nimerik | Senbolik | Eta metaliji | MS/m min. | IACS min. | ||
| CW016A / CW021A | Cu-HCP / CuAg0 | M | 56 | 96.6% | 0.01786 | 0.1588 |
| R360 (H110) | 55 | 94.8% | 0.01818 | 0.1616 | ||
| CW005A / CW004A / CW008A / CW019A / CW020A / CW013A | Cu-PHC / Cu-ETP / Cu-FRHC / CU-OF / CuAg0 | M | 57 | 98.3% | 0.01754 | 0.1559 |
| R200 (H040) | 58 | 100.0% | 0.01724 | 0.1533 | ||
| R240 (H065) | 57 | 98.3% | 0.01754 | 0.1559 | ||
| R360 (H110) | 56 | 96.6% | 0.01786 | 0.1588 |
C12200 Copper Flat Band Tolerans
| Epesè nominal (mm) | Pou Tolerans lajè nominal sou epesè (mm) | ||||||
|---|---|---|---|---|---|---|---|
| Pi gran pase | Jiska ak enkli | Soti nan 10 Jiska 200 (Nòmal) | Soti nan 10 Jiska 200 (espesyal) | Plis pase 200 Jiska 350 ak enkli | Plis pase 350 Jiska 700 ak enkli | Plis pase 700 Jiska 1000 enkli | Plis pase 1000 Jiska 1250 ak enkli |
| 0.05 | 0.1 | ±10% | - | - | - | - | - |
| 0.1 | 0.2 | ±0.010 | ±0.007 | - | ±0.015 | - | - |
| 0.2 | 0.3 | ±0.015 | ±0.010 | ±0.04 | ±0.020 | - | ±0.03 |
| 0.3 | 0.4 | ±0.018 | ±0.012 | ±0.05 | ±0.022 | ±0.07 | ±0.04 |
| 0.4 | 0.5 | ±0.020 | ±0.015 | ±0.06 | ±0.025 | ±0.08 | ±0.05 |
| 0.5 | 0.8 | ±0.025 | ±0.018 | ±0.07 | ±0.030 | ±0.09 | ±0.06 |
| 0.8 | 1.2 | ±0.030 | ±0.022 | ±0.09 | ±0.040 | ±0.10 | ±0.07 |
| 1.2 | 1.8 | ±0.035 | ±0.028 | ±0.10 | ±0.060 | ±0.11 | ±0.08 |
| 1.8 | 2.5 | ±0.045 | ±0.035 | ±0.11 | ±0.070 | ±0.13 | ±0.09 |
| 2.5 | 3.2 | ±0.055 | ±0.040 | ±0.13 | ±0.080 | ±0.17 | ±0.10 |
| 3.2 | 4.0 | - | - | ±0.15 | ±0.100 | ±0.20 | ±0.12 |
| 4.0 | 5.0 | - | - | ±0.17 | ±0.120 | ±0.23 | ±0.14 |
| 5.0 | 6.0 | - | - | ±0.20 | ±0.140 | ±0.26 | ±0.16 |
| 6.0 | 7.0 | - | - | ±0.23 | ±0.160 | ±0.29 | ±0.19 |
| 7.0 | 8.0 | - | - | ±0.26 | ±0.180 | ±0.32 | ±0.22 |
| 8.0 | 9.0 | - | - | ±0.29 | ±0.200 | ±0.35 | ±0.25 |
| 9.0 | 10.0 | - | - | ±0.32 | ±0.220 | ±0.38 | ±0.28 |
| 10.0 | 25.0 | - | - | ±0.35 | ±0.250 | ±0.45 | ±0.30 |
ASTM B280 C12200 taye bann ekivalan
| Non alyaj | UNS | BS | Lòt moun | BS EN |
|---|---|---|---|---|
| C1-03 | C1-02-00 | C1-03 | NF A5-1-11-8-1 | CW-00-8A |
| C1-01 | C1-10-00 | C1-01 | NF A5-1-11-8-1 | CW-00-4A |
| C1-07 | C1-42-00 | C1-07 | BS-28-71; BS-28-75 | – |
| C1-09 | C1-45-00 | C1-09 | 2-15-45 | CW-11-8C |
| C1-06 | C1-22-00; C1-22-10; C1-23-00 | C1-06 | BS-28-70; BS-28-71; BS-28-74 | CW-02-4A |
| C1-10 | C1-01-00 | C1-10 | BS-14-33; BS-38-39 | CW-00-9A |
Tablo pwa alyaj C12200 bann mens
| Pwa (kg) | Lajè × epesè (mm) | Lajè × epesè (mm) | Pwa (kg) |
|---|---|---|---|
| 1.712 | 38 × 5 | 12 × 5 | 0.57 |
| 3.425 | 38 × 10 | 19 × 3 | 0.57 |
| 9.055 | 100 × 10 | 19 × 5 | 0.856 |
| 13.3 | 150 × 10 | 19 × 6 | 1.141 |
| 7.609 | 125 × 6 | 25 × 10 | 2.263 |
| 4.567 | 38 × 12 | 25 × 6 | 1.522 |
| 1.522 | 50 × 3 | 32 × 3 | 0.952 |
| 6.089 | 50 × 12 | 32 × 12 | 3.6 |
| 4.527 | 50 × 10 | 12 × 3 | 0.38 |
| 5.708 | 63 × 10 | 12 × 6 | 0.761 |
| 9.134 | 75 × 12 | 25 × 3 | 0.761 |
| 1.141 | 38 × 3 | 25 × 12 | 3.044 |
| 2.283 | 38 × 6 | 25 × 5 | 1.141 |
| 2.263 | 50 × 5 | 32 × 6 | 1.903 |
| 3.805 | 63 × 6 | 32 × 5 | 1.427 |
| 3.044 | 50 × 6 | 32 × 10 | 2.854 |
| 4.567 | 75 × 6 | 150 × 12 | 17.2 |
| 7.611 | 63 × 12 | 100 × 12 | 12.179 |
| 14.35 | 125 × 12 | 100 × 6 | 6.089 |
| 11.1 | 125 × 10 | 150 × 6 | 9.131 |
| 6.85 | 75 × 10 | – | – |
FAQ
Q1: Ki diferans ki genyen ant papye kwiv C12200 ak tib kwiv C12200?
A: Materyèl la se menm bagay la (C12200 DHP kwiv), men fòm nan diferan.Foil refere a plat, bann mens (0.025mm a 3mm epesè tipikman), pandan y ap tib yo se fòm kre silendrik. Foil yo itilize pou konpozan elektrik, garnitur, ak CLADDING, pandan y ap tib yo itilize pou echanjeur chalè ak kondansateur.
Q2: Ki epesè ki disponib pou papye C12200?
A: epesè varye ant0.0254 mm (0.001") jiska 25 mm. Epesè FOIL ki pi komen yo se nan seri a 0.05mm a 3mm. Pou disponiblite espesifik epesè, tanpri kontakte founisè a.
Q3: Ki tanperaman ki disponib pou bann C12200?
A: Tanperaman ki disponib yo enkli:
Rkwit– Pi mou, ki pi fòmab
Mwatye difisil- Modere fòs
Full Hard- Pi wo fòs, fòmabilite minim
Q4: Ki konduktiviti elektrik C12200 papye a?
A: Tablo pwopriyete fizik yo montre85% IACS nan 68 degre F. Sa a se valè ki kòrèk la pou C12200 (DHP kwiv). Remake byen ke lòt klas kwiv tankou C10100/C10200 ka reyalize 100-101% IACS.
Q5: Ki aplikasyon komen pou papye kwiv C12200?
A: Aplikasyon yo enkli:
Twati kay(konstriksyon bilding)
Chillers(konpozan echanj chalè)
Defans(bann wotasyon pwojektil, tib tòpiyè)
Konpozan elektrik
Joints ak shims
Q6: Ki kòd HSN pou papye kwiv C12200?
A: Kòd HSN la se74102100(Fil kwiv, ki pa fè bak, an kwiv rafine).
Q7: Ki sa ki tès la frajil idwojèn mansyone nan espesifikasyon yo?
A: ASTM B577se estanda pouDeteksyon nan oksid cuprous (sensibilite idwojèn embrittlement) nan kwiv. Tès sa a detèmine si kwiv la gen oksijèn ki ka lakòz fann lè ekspoze a idwojèn nan atmosfè redui. C12200, ke yo te deoksidize ak fosfò, gen bon rezistans nan frajilman idwojèn.
Q8: Ki evalyasyon forgeability nan C12200?
A: Rating forgeability a se65(sou yon echèl kote gratis koupe an kwiv=100). Sa a endike bon travayabilite cho.
Q9: Ki evalyasyon machinability C12200?
A: Rating machinabilite a se20% an kwiv koupe gratis. Sa vle di C12200 se relativman mou ak gluan, ki mande zouti byen file ak lubrasyon apwopriye pou operasyon D.
Q10: Ki diferans ki genyen ant ASTM B152 ak ASTM B75 pou C12200?
A:
ASTM B152– Kouvètifèy kòb kwiv mete, teren, plak, ak ba woule(pwodwi plat tankou papye)
ASTM B75– Kouvètitib kwiv san pwoblèm(pwodwi silendrik kre)
Chwazi ki baze sou fòm ou bezwen an - B152 pou FOIL/band, B75 pou tib.
Q11: Ki koyefisyan ekspansyon tèmik papye C12200 la?
A: Valè yo varye selon ranje tanperati:
68-212 degre F:9.4 × 10⁻⁶/ degre F
68-392 degre F:9.5 × 10⁻⁶/ degre F
68-572 degre F:9.8 × 10⁻⁶/ degre F
Tcheke Stock jodi a ak tan plon
